Canon imageCLASS MF216n Driver Software for Windows 10, 8, 7

Posted on

Canon imageCLASS MF216n Printer Driver & Setup Software Scan Utility My Image, Download, Scanner, and Firmware For Windows 10, 8, 7, Mac OS Full and Free Install, Wireless & Manual Setup. You use the front panel touch display black and white six-line Canon imageCLASS MF216n. I discovered the touch screen could not get, call for several times the keystrokes to introduce the electronic choice. There are no physical buttons to take a look at as well as duplicate functions (just house and Back), so you require to use the touch screen to create the checked or duplicated. More than 35 sheet ADF printers raised to expose the scanner plate. Joint cover can maintain the weight of regarding 45 level, which functions if you need to place the device in the rear of the eight spheres without complete vertical variety. Under the scheme, the scanner tray is created inside the body cavity, with a second component that pulls out and after that extra based on the outside. Ultimately development, it may not be proper for areas of high website traffic web sites and might be at risk of damage. A beautiful print job will certainly not be up to the flooring if it’s just the first component of the catch.

Canon imageCLASS MF216n Drivers, Software, Download, Scanner, and Firmware
Canon imageCLASS MF216n Drivers, Software, Download, Scanner, and Firmware

MF217w equally as fast with paper messages and also graphics, we likewise took it out six web pages in simply 29.6 seconds, or 12.2 ppm-11.1 seconds is much faster than the average, as well as additionally concerning fifty percent of the moment the slowest printers we evaluate, HP. Canon imageCLASS MF216n. His tale is not unlike a complete page with image: MF217w print it out in 11.1 seconds, dramatically faster than the common Group 16 seconds, as well as additionally half the moment it takes the slowest model in the testing, which consists of MF229dw property of Canon. Usage Quiet Mode the printer slows factors, yet very little. To create a replicate takes 14.9 secs, turn on the Quiet Setting merely adds 2.4 seconds to procedure. Canon imageCLASS MF216n additionally generates the fastest ever double speed we determine, defeating approximately 2 secs. The page you duplicated it in 8.7 secs faster than a lot of other different versions, conserve for the Samsung M2070FW, published at the same time. For this, we utilize the default setting, e.g., text/photo on MF217w.

More: Canon PIXMA MG7520 Driver Software for Windows 10, 8, 7

You can likewise publish to Canon MF217w from mobile iOS or Android, though more than likely invested much more slowly than on the COMPUTER. The six-page note on the same published MF217w in less than 30 seconds from your PC takes 80 secs to be sent out from my Android phone. Quick price does not boost much, obviously, if the quality of the record endured. And also Canon imageCLASS MF216n makes this pair is exciting. The premium quality of the duplicates is equally high, with details as well as appearance are precisely the like that created by all the most effective entry-level test. Also, although you might expect a copy made with the quick setting (default) has a reduced quality than the different other alternatives, I locate the effect is minimal. The message looks that’s developed as well as additionally as smooth as, though much less chart information in a dark place and even its not as smooth as midtone. A reproduction of the image needs to change the setups to high-quality photos, as you anticipate.

CompatibilityWindows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

Canon imageCLASS MF216n Driver Downloads

File Name Size Download
[Windows 64bit] imageCLASS MF217w/MF216n/MF212w MFDrivers (UFR II / FAX / ScanGear)
[Windows 32-bit & 64-bit] Patch for Network Scan, USB Scan
UFR II/UFRII LT V4 Printer Driver V7.1

Canon imageCLASS MF216n Wireless Setup

Wi-Fi Protected Setup (WPS) allows you to connect network devices to a secure wireless network easily. You do not need to know your SSID or password (network key) when using this method.  If your router supports WPS, it should display the WPS symbol. For additional details, refer to your router’s documentation.

  1. Make sure your printer is on.
  2. Press the Menu button on the printer’s operation panel.
  3. Use the arrow buttons (LEFT,RIGHTUPDOWN) to select WLAN setup, then press OK.
  4. The printer searches for access points (routers). If a WPS-compatible access point is detected, the following screen appears.
  5. Press and hold the WPS button on your router for 5 seconds, then press OK on the printer’s operation panel.
    Note: For specific details on your router’s WPS button operation, refer to your router documentation.
  6. Press OK when Connected to the access point appears.
    Note: If the timeout error screen appears, press OK, then start over from step 4.
  7. Your printer is now connected to your Wi-Fi network.

Install Printer Software For Windows

  1. Start the installer.
  2. Read the connection instructions and then select Next.
  3. The Software Installation List appears. MP Drivers must be selected to use the printer. Select any other software you want to install and click Next.
  4. Select Yes for the license agreement.
  5. Select Next to allow the install wizard to run.
  6. Select your printer in the Detected Printers List and click Next.
  7. Click Complete on the Setup Completion screen.
  8. Continue to follow the on-screen instructions. When the Complete Setup screen appears the printer setup is complete.
  9. Click Next and follow any remaining Informational steps.

Install Printer Software For Mac OS

  1. Insert the CD-ROM that came with your printer, and select the Setup icon to begin the installation
  2. Click Download 
  3. When the Complete Download window appears, click Next.
    Note: To keep a copy of the download file for possible future use to re-install, etc., be sure to check the “Save a file for setting up……” checkbox.
  4. Select Next to install the helper tool.
  5. Enter user information and password. Click Install Helper.
  6. Click Next.
  7. Continue following On-Screen instructions until the Software Installation List appears.
    Note: Only MP Drivers and Canon IJ Network Tool are required. However, we recommended installing ScanGearMy Image Garden and Quick Menu to take full advantage of your printer’s features.
  8. After selecting the software to install, click Next.
  9. Click Yes on the License Agreement.
  10. Setup will continue and may take some time. Continue to follow any on-screen instructions that appear.
  11. When the Add Printer screen appears, click Add Printer.
  12. Select the Your Printer series with Canon IJ Network listed in the Kind column. Click Add.
  13. On the Add Printer screen, click Next.
  14. Continue to follow instructions to finish and exit setup.
  15. Your printer software is installed and set up.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.
  2. Select “Canon XXX series Network” (where “XXX” is the model name) for Product Name.
  3. Click Settings… to use another scanner connected to a network.
  4. Click  (General Settings), then click Select in Product Name.
  5. The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
  6. Select the scanner you want to use and click OK.
  7. In the Settings (General Settings) dialog box, click OK.
  8. The IJ Scan Utility main screen reappears. You can scan via a network connection.

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on
  2. Load paper on the printer
  3. Open the printer driver setup window
  4. Select a frequently used profile
    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional FeaturesMedia Type, and Printer Paper Size settings are automatically switched to the values that were present.
  5. Select the print quality
    For Print Quality, select HighStandard, or Draft according to your purpose.
  6. Complete the setup
    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *