Canon PIXMA MX300 Driver Software for Windows 10, 8, 7

Posted on

Canon PIXMA MX300 Driver Software for Windows 10, 8, 7 – A bit huge for all-in-one low-cost. It has a width of 465mm, 440mm, along with a high 174mm depth, but is considered 7 kg. The grey light system does not have an automated paper feeder, which is uncommon for the Workplace, which is multifunctional oriented. However, it is not shocking by taking into consideration the inexpensive cost. This is the only Canon All-in-one Work Environment that does not provide the ADF. The scanner cover hides the A4 size scanner, and also without the ADF, A4 is the most substantial dimension of the original documents you can check. This Printer does not have a flash memory card slot, yet it does give a USB port for the PictBridge-enabled video camera, in addition to a phone-capable telephone.

Canon PIXMA MX300 Driver Software for Windows 10, 8, 7
Canon PIXMA MX300 Driver Software for Windows 10, 8, 7

The Canon PIXMA MX300 uses two ink storage tank systems: one black as well as one color cartridge as well as Canon providing three choices for any dimensional container. The Canon Pixma MX300 only provides USB links, making it very appropriate for single-user work environments. It collaborates with Mac as well as Windows COMPUTER SYSTEM. The choice of deal with this multifunction printer is typical for versions on this expense aspect. When duplicating, you can reduce/enlarge between 25 percent to 400 percent. A particular duplication alternative contains duplicating sticker label labels, rep images, 2-on-1 along with 4-on-1, as well as matches of the gotten rid of the skeleton. Removal of the appropriate framework in a state where the duplicated product is smaller sized than the defined paper (the book, for example). As opposed to publishing an additional location as black, the printer overlooks it, thus stopping the waste of black ink.

Read More: Canon iR ADVANCE C5240 Driver Software for Windows 10, 8, 7

The printer’s walk-up scanning capability does not exist. Although the Control Panel supplies a button to scan the task, after you push Start, the printer develops an MP Navigator Ex-Lover software program application that is presented on your COMPUTER SYSTEM. You should click the Scan switch in the software program to start the scan. Nevertheless, MP Navigator EX-SPOUSE is a user-friendly application that permits you to change the scanning resolution, determine the type of notes you can (pictures, data, publications, and so on), as well as after that change the test results Generated. The Save As alternatives include JPEG, TIFF, BMP, and PDF, as well as you can additionally select where to conserve the documents. The Program additionally permits you to paste the examined documents right into the email. The less-owned feature of the Canon PIXMA MX300 scanning is the capability to check straight to software application applications such as Paint or Word. You have to find out, conserve, as well as afterward by hand, open the file in the program you intend to use.

How To Setup Canon PIXMA MX300 Driver Installations Setup

  1. The first thing that you need is the setup data that you can download from many online websites. Make sure the website is reputable enough.
  2. The second thing that you need is running the setup file that you have downloaded, and the installation wizard will appear. On the installation wizard, you need to choose the location where you want to install the driver. As an addition, do not forget to check on the components that you want to connect with the driver of this printer.
  3. After you do that, the installation process of the Canon PIXMA MX300 Driver will be started automatically
  4. After waiting for some minutes, the installation will be completed, and you can close the installation wizard.
  5. For your consideration, it will be better for you to reboot the computer first. This thing is to make sure that the installation process is done correctly so that you will not find any problem after the installation.

How To Setup Canon PIXMA MX300 Driver Manual Settings

  1. The initial thing to do is to check out Canon main website and also try to find the printer version you are utilizing by getting in the design in the search bar.
  2. Downloading and install chauffeurs from the main website is advised to avoid any documents including the infection that may harm your computer.
  3. Select the os according to the computer you are currently utilizing, and then download and install the file. Wait until the download procedure is ended up.
  4. When the download process is done, double-click the documents to run the driver. Follow the instructions from the driver. Ensure your printer gets on already and also do not connect the USB cable television to the computer up until it is prompted by the drivers. After it is finished, try to publish to see if the installation is done appropriately.

How To Setup Canon PIXMA MX300 Driver For Windows

  1. For the beginner, you will undoubtedly require the arrangement to declare this printer. To obtain the documents, you can easily download and install the setup file from many different sources online. Ensure you are downloading and fit the appropriate configuration documents that you require for this printer.
  2. The following thing that you require to do in mounting the Canon PIXMA MX300 Driver is running the arrangement documents that you have downloaded before.
  3. After you run the setup documents, the automatic wizard will undoubtedly show up, and you can follow all of the guidelines from the automatic wizard. For your information, when the automatic wizard runs, you will undoubtedly have to enter the area where you intend to set up the driver in your computer system.
  4. When you have completed every one of the processes on the installment wizard, the wizard will inform you to shut it as well as you are ready to go.

How To Setup Canon PIXMA MX300 Driver Use CD / DVD

  1. You need to have the configuration documents if you want to mount the vehicle driver of this printer. You can quickly obtain the materials that you need from the main website of Canon.
  2. See to it you are downloading the appropriate data given that there are some other similar configuration data from the internet site.
  3. After you download and install the documents, you require to run the file to install the Canon PIXMA MX300 Driver and afterward, the installment wizard will undoubtedly turn up.
  4. When the installment wizard has turned up, you will be provided some choices that you can select related to the installation of the chauffeur.
  5. As soon as you have finished with the wizard, the setup process will start as well as it will be completed within a few minutes.
    When whatever is done, you can start publishing your initial web page using this printer.

CompatibilityWindows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

Canon PIXMA MX300 Driver Downloads

File Name Size Download
MX300 series MP Driver Ver. 1.01 (Windows 8.1/8/7/Vista/XP/2000)
Recommended
DOWNLOAD
Easy-WebPrint EX Ver.1.7.0 (Windows)
Drivers
DOWNLOAD
My Image Garden Ver.3.6.1 (Windows)
Drivers
DOWNLOAD
Easy-PhotoPrint EX Ver.4.7.0 (Windows)
Drivers
DOWNLOAD
My Printer Ver.3.3.0 (Windows)
Drivers
DOWNLOAD
MP Navigator EX Ver. 1.08 (Windows 8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP/2000)
Drivers
DOWNLOAD
Solution Menu Ver. 1.4.3 (Windows 8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP/2000)
Drivers
DOWNLOAD
Windows Adobe RGB 1998 Installer Program
Drivers
DOWNLOAD
MX300 series Firmware Upgrade Utility Ver. 1.040 (Mac OS X 10.2/10.3/10.4/10.5/10.6/10.7)
Drivers
DOWNLOAD
MX300 series Firmware Upgrade Utility Ver. 1.040 (Windows 7/Vista/XP/2000)
Drivers
DOWNLOAD

Canon PIXMA MX300 Driver Wireless Setup

Wi-Fi Protected Setup (WPS) allows you to connect network devices to a secure wireless network easily. You do not need to know your SSID or password (network key) when using this method.  If your router supports WPS, it should display the WPS symbol. For additional details, refer to your router’s documentation.

  1. Make sure your printer is on.
  2. Press the Menu button on the printer’s operation panel.
  3. Use the arrow buttons (LEFT,RIGHTUPDOWN) to select WLAN setup, then press OK.
  4. The printer searches for access points (routers). If a WPS-compatible access point is detected, the following screen appears.
  5. Press and hold the WPS button on your router for 5 seconds, then press OK on the printer’s operation panel.
    Note: For specific details on your router’s WPS button operation, refer to your router documentation.
  6. Press OK when Connected to the access point appears.
    Note: If the timeout error screen appears, press OK, then start over from step 4.
  7. Your printer is now connected to your Wi-Fi network.

Install Printer Software For Windows

  1. Start the installer.
  2. Read the connection instructions and then select Next.
  3. The Software Installation List appears. MP Drivers must be selected to use the printer. Select any other software you want to install and click Next.
  4. Select Yes for the license agreement.
  5. Select Next to allow the install wizard to run.
  6. Select your printer in the Detected Printers List and click Next.
  7. Click Complete on the Setup Completion screen.
  8. Continue to follow the on-screen instructions. When the Complete Setup screen appears the printer setup is complete.
  9. Click Next and follow any remaining Informational steps.

Install Printer Software For Mac OS

  1. Insert the CD-ROM that came with your printer, and select the Setup icon to begin the installation
  2. Click Download 
  3. When the Complete Download window appears, click Next.
    Note: To keep a copy of the download file for possible future use to re-install, etc., be sure to check the “Save a file for setting up……” checkbox.
  4. Select Next to install the helper tool.
  5. Enter user information and password. Click Install Helper.
  6. Click Next.
  7. Continue following On-Screen instructions until the Software Installation List appears.
    Note: Only MP Drivers and Canon IJ Network Tool are required. However, we recommended installing ScanGearMy Image Garden and Quick Menu to take full advantage of your printer’s features.
  8. After selecting the software to install, click Next.
  9. Click Yes on the License Agreement.
  10. Setup will continue and may take some time. Continue to follow any on-screen instructions that appear.
  11. When the Add Printer screen appears, click Add Printer.
  12. Select the Your Printer series with Canon IJ Network listed in the Kind column. Click Add.
  13. On the Add Printer screen, click Next.
  14. Continue to follow instructions to finish and exit setup.
  15. Your printer software is installed and set up.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.
  2. Select “Canon XXX series Network” (where “XXX” is the model name) for Product Name.
  3. Click Settings… to use another scanner connected to a network.
  4. Click  (General Settings), then click Select in Product Name.
  5. The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
  6. Select the scanner you want to use and click OK.
  7. In the Settings (General Settings) dialog box, click OK.
  8. The IJ Scan Utility main screen reappears. You can scan via a network connection.

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on
  2. Load paper on the printer
  3. Open the printer driver setup window
  4. Select a frequently used profile
    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional FeaturesMedia Type, and Printer Paper Size settings are automatically switched to the values that were present.
  5. Select the print quality
    For Print Quality, select HighStandard, or Draft according to your purpose.
  6. Complete the setup
    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *