Canon PIXMA MX450 Scanner Software & Driver Downloads

Posted on

Canon PIXMA MX450 Scanner Software & Driver Downloads – all-in-one printer lies in the center of Canon’s multifunctional printers. Unlike the other costly Canon all-in-one office, MP450 $129 is developed for house individuals. It doesn’t use fax or network capabilities. However, its various functions permit you to print, scan, duplicate, and also print photos from a memory card or PictBridge electronic camera without your COMPUTER. This is a standard printer, with just one paper feeder and no duplexer. For virtually the same cost, HP PSC 2335 and also Lexmark P6250 offer features that are about the same; however, the performance and print quality is worse. If you need a comfortable yet functional residence printer that doesn’t occupy as much work desk room, ideally a Canon Pixma MP450. The Canon Pixma MP450 is compact enough for an all-in-one house. With a folded input and also result in the in-tray, it gauges the size of 17.5 inches x 12.2 inches x 6.3 inches.

Canon PIXMA MX450 Scanner Software & Driver Downloads
Canon PIXMA MX450 Scanner Software & Driver Downloads

The media card visitor is concealed behind the door and accepts one of the most common types of cards. You will require an adaptor for the xD-Picture card, MiniSD card, as well as Memory Stick Duo and Memory Stick Duo Pro. The front-end USB PictBridge Port allows you to publish directly from a PictBridge-enabled camera and also cam phone, while the IrDA port will enable you to print from a cam phone that sustains infrared wirelessly. The flatbed scanner can check original documents as much as 8.5 inches by 11.75 inches-approximately A4 paper size. The cover is raised to accommodate a unique paper that is thicker approximately 0.75 inches. The control panel is quite essential for all-in-one printers. You can readjust the 1.9-inch color LCD angle According to your display problems, as well as although little, yet legible. The Panel has switches to switch between tasks, navigate menus, as well as print image index sheets. Two start switches (one for black ink as well as one for color), stop/reset switch, and on/off switch complement the control Panel.

Read More: Canon imageCLASS MF4350d Scanner Software & Driver Downloads

The Canon Pixma MP450 uses four-color inks: one black storage tank and one three-color tank (delivered with a high-capacity container). You can access the containers by raising the control board; The plastic support bar is reversed to support the lid, such as the piano cap or cars and truck hood. The containers are straightforward to change. $29.99 high-capacity black storage tank and high-capacity tricolor tank sets you back $34.99. Canon estimates the cost per web page for this printer regarding 4 cents for a single web page of the black message as well as 11 cents for a single web page shade photo. In comparison, Pixma MP500 supplies even more ink versatility: 3 separate dye-based color ink tanks, black dye-based ink storage tanks, as well as black pigment-based ink tanks. This Printer has a regular series of alternatives for one in the rate array. While copying, you can zoom in as well as out, make a frameless copy and also print without a framework color, create a sticker, as well as repeat the image several times on a notepad. With media card viewers, you can print individual photos from a card, or publish an entire index sheet.

How To Setup Canon PIXMA MX450 Installations Setup

  1. The first thing that you need is the setup data that you can download from many online websites. Make sure the website is reputable enough.
  2. The second thing that you need is running the setup file that you have downloaded, and the installation wizard will appear. On the installation wizard, you need to choose the location where you want to install the driver. As an addition, do not forget to check on the components that you want to connect with the driver of this printer.
  3. After you do that, the installation process of the Canon PIXMA MX450 will be started automatically
  4. After waiting for some minutes, the installation will be completed, and you can close the installation wizard.
  5. For your consideration, it will be better for you to reboot the computer first. This thing is to make sure that the installation process is done correctly so that you will not find any problem after the installation.

How To Setup Canon PIXMA MX450 Manual Settings

  1. The initial thing to do is to check out Canon main website and also try to find the printer version you are utilizing by getting in the design in the search bar.
  2. Downloading and install chauffeurs from the main website is advised to avoid any documents including the infection that may harm your computer.
  3. Select the os according to the computer you are currently utilizing, and then download and install the file. Wait until the download procedure is ended up.
  4. When the download process is done, double-click the documents to run the driver. Follow the instructions from the driver. Ensure your printer gets on already and also do not connect the USB cable television to the computer up until it is prompted by the drivers. After it is finished, try to publish to see if the installation is done appropriately.

How To Setup Canon PIXMA MX450 For Windows

  1. For the beginner, you will undoubtedly require the arrangement to declare this printer. To obtain the documents, you can easily download and install the setup file from many different sources online. Ensure you are downloading and fit the appropriate configuration documents that you require for this printer.
  2. The following thing that you require to do in mounting the Canon PIXMA MX450 is running the arrangement documents that you have downloaded before.
  3. After you run the setup documents, the automatic wizard will undoubtedly show up, and you can follow all of the guidelines from the automatic wizard. For your information, when the automatic wizard runs, you will undoubtedly have to enter the area where you intend to set up the driver in your computer system.
  4. When you have completed every one of the processes on the installment wizard, the wizard will inform you to shut it as well as you are ready to go.

How To Setup Canon PIXMA MX450 Use CD / DVD

  1. You need to have the configuration documents if you want to mount the vehicle driver of this printer. You can quickly obtain the materials that you need from the main website of Canon.
  2. See to it you are downloading the appropriate data given that there are some other similar configuration data from the internet site.
  3. After you download and install the documents, you require to run the file to install the Canon PIXMA MX450 and afterward, the installment wizard will undoubtedly turn up.
  4. When the installment wizard has turned up, you will be provided some choices that you can select related to the installation of the chauffeur.
  5. As soon as you have finished with the wizard, the setup process will start as well as it will be completed within a few minutes.
    When whatever is done, you can start publishing your initial web page using this printer.

CompatibilityWindows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

Canon PIXMA MX450 Driver Downloads

File Name Size Download
MX450 series XPS Printer Driver Ver. 5.65 (Windows)
14.20 MB
DOWNLOAD
MX450 series MP Drivers Ver.1.01 (Windows)
36.73 MB
DOWNLOAD
Easy-WebPrint EX Ver.1.7.0 (Windows)
15.21 MB
DOWNLOAD
My Image Garden Ver.3.6.1 (Windows)
294.39 MB
DOWNLOAD
Speed Dial Utility Ver. 1.6.0 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)
4.84 MB
DOWNLOAD
Easy-PhotoPrint EX Ver.4.7.0 (Windows)
57.57 MB
DOWNLOAD
Quick Menu Ver.2.8.5 (Windows)
9.07 MB
DOWNLOAD
My Printer Ver.3.3.0 (Windows)
5.55 MB
DOWNLOAD

Canon PIXMA MX450 Wireless Setup

Wi-Fi Protected Setup (WPS) allows you to connect network devices to a secure wireless network easily. You do not need to know your SSID or password (network key) when using this method.  If your router supports WPS, it should display the WPS symbol. For additional details, refer to your router’s documentation.

  1. Make sure your printer is on.
  2. Press the Menu button on the printer’s operation panel.
  3. Use the arrow buttons (LEFT,RIGHTUPDOWN) to select WLAN setup, then press OK.
  4. The printer searches for access points (routers). If a WPS-compatible access point is detected, the following screen appears.
  5. Press and hold the WPS button on your router for 5 seconds, then press OK on the printer’s operation panel.
    Note: For specific details on your router’s WPS button operation, refer to your router documentation.
  6. Press OK when Connected to the access point appears.
    Note: If the timeout error screen appears, press OK, then start over from step 4.
  7. Your printer is now connected to your Wi-Fi network.

Install Printer Software For Windows

  1. Start the installer.
  2. Read the connection instructions and then select Next.
  3. The Software Installation List appears. MP Drivers must be selected to use the printer. Select any other software you want to install and click Next.
  4. Select Yes for the license agreement.
  5. Select Next to allow the install wizard to run.
  6. Select your printer in the Detected Printers List and click Next.
  7. Click Complete on the Setup Completion screen.
  8. Continue to follow the on-screen instructions. When the Complete Setup screen appears the printer setup is complete.
  9. Click Next and follow any remaining Informational steps.

Install Printer Software For Mac OS

  1. Insert the CD-ROM that came with your printer, and select the Setup icon to begin the installation
  2. Click Download 
  3. When the Complete Download window appears, click Next.
    Note: To keep a copy of the download file for possible future use to re-install, etc., be sure to check the “Save a file for setting up……” checkbox.
  4. Select Next to install the helper tool.
  5. Enter user information and password. Click Install Helper.
  6. Click Next.
  7. Continue following On-Screen instructions until the Software Installation List appears.
    Note: Only MP Drivers and Canon IJ Network Tool are required. However, we recommended installing ScanGearMy Image Garden and Quick Menu to take full advantage of your printer’s features.
  8. After selecting the software to install, click Next.
  9. Click Yes on the License Agreement.
  10. Setup will continue and may take some time. Continue to follow any on-screen instructions that appear.
  11. When the Add Printer screen appears, click Add Printer.
  12. Select the Your Printer series with Canon IJ Network listed in the Kind column. Click Add.
  13. On the Add Printer screen, click Next.
  14. Continue to follow instructions to finish and exit setup.
  15. Your printer software is installed and set up.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.
  2. Select “Canon XXX series Network” (where “XXX” is the model name) for Product Name.
  3. Click Settings… to use another scanner connected to a network.
  4. Click  (General Settings), then click Select in Product Name.
  5. The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
  6. Select the scanner you want to use and click OK.
  7. In the Settings (General Settings) dialog box, click OK.
  8. The IJ Scan Utility main screen reappears. You can scan via a network connection.

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on
  2. Load paper on the printer
  3. Open the printer driver setup window
  4. Select a frequently used profile
    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional FeaturesMedia Type, and Printer Paper Size settings are automatically switched to the values that were present.
  5. Select the print quality
    For Print Quality, select HighStandard, or Draft according to your purpose.
  6. Complete the setup
    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *