Canon PIXMA MX452 Driver Software for Windows 10, 8, 7

Posted on

Canon PIXMA MX452 Printer Driver & Setup Software Scan Utility My Image, Download, Scanner, and Firmware For Windows 10, 8, 7, Mac OS Full and Free Install, Wireless & Manual Setup.

CompatibilityWindows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

Canon PIXMA MX452 Drivers, Software, Download, Scanner, and Firmware
Canon PIXMA MX452 Drivers, Software, Download, Scanner, and Firmware

Canon PIXMA MX452 is one of minority multifunction printers (MFP) were reasonably couple of in the price variety that was developed additional for Office needs, in contrast to the demands of the home. Emphasis functions show up in the Office-centric capacities varying from fax to automatic document measurement office. Like the Bro MFC-J430w, Editor’s choice in this category as well as likewise the rivals head-to-head, Canon PIXMA MX452, scan to print from, as well as fax from your COMPUTER, along with likewise operate as a copy machine and also facsimile device that depends on its own. Similar to most of the MFP is planned for using Workplace, ADF letter-size flatbed, overall with multi web page record taking care of the ADF and also legal-sized pages. The ADF similarly a little improve the MFC-J430w, with higher input ability, at 30 websites. One more attractive touch is the capability to check (however not release nevertheless, products free of charge Wi-Fi so that you can share the printer on the network.

More: Canon PIXMA MP620 Driver Software for Windows 10, 8, 7

Also worthwhile of reference is that Canon PIXMA MX452 sustains AirPrint. Nevertheless, you can not link straight to utilize AirPrint. Printers and additionally smart devices or tablet you need to be connected using the Wi-Fi gain access to factor in your network. The visuals result in amounts MFP inkjet, so it’s exceptional enough for indoor service calls for up to as well as likewise including the PowerPoint handouts and so forth. Relying upon precisely just how important the eye you have, you can think about adequate graphics for outcome goes to the customer or client is necessary. Picture certifies as high quality the same degree as well, yet merely barely. That suggests the actual photo top quality, yet about matched for the most terrible you would certainly prepare for from the mold as well as mildew of a medicine shop. In most ways, a Printer all-in-One Canon PIXMA MX452 is an achieved personal MFP along with can face each different other with the Brother MFC-J430w. One downside is its speed that makes the Sibling printer alternatives much better for several workplaces.

Canon PIXMA MX452 Driver Downloads

File Name Size Download
MX450 series MP Drivers Ver.1.01 (Windows)
MX450 series XPS Printer Driver Ver. 5.65 (Windows)

Canon PIXMA MX452 Wireless Setup

Wi-Fi Protected Setup (WPS) allows you to connect network devices to a secure wireless network easily. You do not need to know your SSID or password (network key) when using this method.  If your router supports WPS, it should display the WPS symbol. For additional details, refer to your router’s documentation.

  1. Make sure your printer is on.
  2. Press the Menu button on the printer’s operation panel.
  3. Use the arrow buttons (LEFT,RIGHTUPDOWN) to select WLAN setup, then press OK.
  4. The printer searches for access points (routers). If a WPS-compatible access point is detected, the following screen appears.
  5. Press and hold the WPS button on your router for 5 seconds, then press OK on the printer’s operation panel.
    Note: For specific details on your router’s WPS button operation, refer to your router documentation.
  6. Press OK when Connected to the access point appears.
    Note: If the timeout error screen appears, press OK, then start over from step 4.
  7. Your printer is now connected to your Wi-Fi network.

Install Printer Software For Windows

  1. Start the installer.
  2. Read the connection instructions and then select Next.
  3. The Software Installation List appears. MP Drivers must be selected to use the printer. Select any other software you want to install and click Next.
  4. Select Yes for the license agreement.
  5. Select Next to allow the install wizard to run.
  6. Select your printer in the Detected Printers List and click Next.
  7. Click Complete on the Setup Completion screen.
  8. Continue to follow the on-screen instructions. When the Complete Setup screen appears the printer setup is complete.
  9. Click Next and follow any remaining Informational steps.

Install Printer Software For Mac OS

  1. Insert the CD-ROM that came with your printer, and select the Setup icon to begin the installation
  2. Click Download 
  3. When the Complete Download window appears, click Next.
    Note: To keep a copy of the download file for possible future use to re-install, etc., be sure to check the “Save a file for setting up……” checkbox.
  4. Select Next to install the helper tool.
  5. Enter user information and password. Click Install Helper.
  6. Click Next.
  7. Continue following On-Screen instructions until the Software Installation List appears.
    Note: Only MP Drivers and Canon IJ Network Tool are required. However, we recommended installing ScanGearMy Image Garden and Quick Menu to take full advantage of your printer’s features.
  8. After selecting the software to install, click Next.
  9. Click Yes on the License Agreement.
  10. Setup will continue and may take some time. Continue to follow any on-screen instructions that appear.
  11. When the Add Printer screen appears, click Add Printer.
  12. Select the Your Printer series with Canon IJ Network listed in the Kind column. Click Add.
  13. On the Add Printer screen, click Next.
  14. Continue to follow instructions to finish and exit setup.
  15. Your printer software is installed and set up.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.
  2. Select “Canon XXX series Network” (where “XXX” is the model name) for Product Name.
  3. Click Settings… to use another scanner connected to a network.
  4. Click  (General Settings), then click Select in Product Name.
  5. The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
  6. Select the scanner you want to use and click OK.
  7. In the Settings (General Settings) dialog box, click OK.
  8. The IJ Scan Utility main screen reappears. You can scan via a network connection.

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on
  2. Load paper on the printer
  3. Open the printer driver setup window
  4. Select a frequently used profile
    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional FeaturesMedia Type, and Printer Paper Size settings are automatically switched to the values that were present.
  5. Select the print quality
    For Print Quality, select HighStandard, or Draft according to your purpose.
  6. Complete the setup
    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *