Canon PIXMA MX882 Driver Software for Windows 10, 8, 7

Posted on

Canon PIXMA MX882 Driver Software for Windows 10, 8, 7 – Canon’s printed Control panel layout is a excellent factor for creative thinking; however, releases energy for intelligence. The transgressor is a grid switch that features four 3-inch shade LCD, in addition to a light or dark fit. The beautiful indications are not organized, offset to the left. The complete influence is also complicated; Additionally, after we obtain made use of to it, the switch release is still a little uncomfortable to use. The Canon PIXMA MX882 attribute will rapidly match your tiny workplace. USB, Ethernet, and also Wi-Fi connectivity are needed, in addition to the ports for the Memory Stick, SD Card, and XD-Picture Media card, plus the USB/PictBridge port. Paper managing includes a 150-sheet input tray that is mounted below for standard or lawful size paper, in addition to the back vertical bait for thicker media or 150 sheets of paper for every other range.

Canon PIXMA MX882 Drivers, Software, Download, Scanner, and Firmware
Canon PIXMA MX882 Drivers, Software, Download, Scanner, and Firmware

In inspecting our speed, the Canon PIXMA MX882 landed in the midrange or better. Abundant black text and additionally monochrome graphics secure a typical 7.5 pages per minute on a COMPUTER and practically 8 ppm on a Mac. The snapshot dimensions the picture at 3 ppm when published on a smooth paper on the current setup, and also it likewise slows to 1.9 ppm in a much better setting on the Canon drawing paper itself. Scans and also duplicates promptly sufficient. You can achieve a much better place in the concept of fashion. The black and white messages likewise graphics create Canon PIXMA MX882 is outstanding-only black and also completely pulled in the default setting, as well as virtually like a laser in a high-quality premium set. Shade quality is influenced by paper type: ordinary paper, our image looks as well pink or orange, and also soft. Change to Canon attracting glossy paper covering brings back smoother and too much more all-natural.

Read More: Canon CanoScan LiDE 220 Driver Software for Windows 10, 8, 7

Checking out shades shows the same reddish trend; however, the grayscale check is fully certified. The ink price for the Canon PIXMA MX882 is far better than the requirement. The black pigment made use of for text $16 is substantial and also resilient 341 pages or 4.7 cents per page. Cyan. Canon also supplies black dye-based photos, a lot of which are indicated for publishing images; The price is $14 and additionally held photos four times 670-6 inches, according to business. The Kodak ESP 9250 has a more affordable ink, but not in any various other facets. Canon Power swimming pools for COMPUTERS along with Macs. It handles every little thing from a fundamental check to Optical Character Recognition and photo alteration, in addition to formatting and also printing. Standard straight installation calls for little individual treatment.

How To Setup Canon PIXMA MX882 Driver Installations Setup

  1. The first thing that you need is the setup data that you can download from many online websites. Make sure the website is reputable enough.
  2. The second thing that you need is running the setup file that you have downloaded, and the installation wizard will appear. On the installation wizard, you need to choose the location where you want to install the driver. As an addition, do not forget to check on the components that you want to connect with the driver of this printer.
  3. After you do that, the installation process of the Canon PIXMA MX882 Driver will be started automatically
  4. After waiting for some minutes, the installation will be completed, and you can close the installation wizard.
  5. For your consideration, it will be better for you to reboot the computer first. This thing is to make sure that the installation process is done correctly so that you will not find any problem after the installation.

How To Setup Canon PIXMA MX882 Driver Manual Settings

  1. The initial thing to do is to check out Canon main website and also try to find the printer version you are utilizing by getting in the design in the search bar.
  2. Downloading and install chauffeurs from the main website is advised to avoid any documents including the infection that may harm your computer.
  3. Select the os according to the computer you are currently utilizing, and then download and install the file. Wait until the download procedure is ended up.
  4. When the download process is done, double-click the documents to run the driver. Follow the instructions from the driver. Ensure your printer gets on already and also do not connect the USB cable television to the computer up until it is prompted by the drivers. After it is finished, try to publish to see if the installation is done appropriately.

How To Setup Canon PIXMA MX882 Driver For Windows

  1. For the beginner, you will undoubtedly require the arrangement to declare this printer. To obtain the documents, you can easily download and install the setup file from many different sources online. Ensure you are downloading and fit the appropriate configuration documents that you require for this printer.
  2. The following thing that you require to do in mounting the Canon PIXMA MX882 Driver is running the arrangement documents that you have downloaded before.
  3. After you run the setup documents, the automatic wizard will undoubtedly show up, and you can follow all of the guidelines from the automatic wizard. For your information, when the automatic wizard runs, you will undoubtedly have to enter the area where you intend to set up the driver in your computer system.
  4. When you have completed every one of the processes on the installment wizard, the wizard will inform you to shut it as well as you are ready to go.

How To Setup Canon PIXMA MX882 Driver Use CD / DVD

  1. You need to have the configuration documents if you want to mount the vehicle driver of this printer. You can quickly obtain the materials that you need from the main website of Canon.
  2. See to it you are downloading the appropriate data given that there are some other similar configuration data from the internet site.
  3. After you download and install the documents, you require to run the file to install the Canon PIXMA MX882 Driver and afterward, the installment wizard will undoubtedly turn up.
  4. When the installment wizard has turned up, you will be provided some choices that you can select related to the installation of the chauffeur.
  5. As soon as you have finished with the wizard, the setup process will start as well as it will be completed within a few minutes.
    When whatever is done, you can start publishing your initial web page using this printer.

CompatibilityWindows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS

Canon PIXMA MX882 Driver Downloads

File Name Size Download
MX880 series MP Driver Ver. 1.02 (Windows)
Recommended
DOWNLOAD
MX880 series XPS Printer Driver Ver. 5.56 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64)
Drivers
DOWNLOAD
Speed Dial Utility Ver. 1.6.0 (Windows 10/10 x64/8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP)
Drivers
DOWNLOAD

Canon PIXMA MX882 Driver Wireless Setup

Wi-Fi Protected Setup (WPS) allows you to connect network devices to a secure wireless network easily. You do not need to know your SSID or password (network key) when using this method.  If your router supports WPS, it should display the WPS symbol. For additional details, refer to your router’s documentation.

  1. Make sure your printer is on.
  2. Press the Menu button on the printer’s operation panel.
  3. Use the arrow buttons (LEFT,RIGHTUPDOWN) to select WLAN setup, then press OK.
  4. The printer searches for access points (routers). If a WPS-compatible access point is detected, the following screen appears.
  5. Press and hold the WPS button on your router for 5 seconds, then press OK on the printer’s operation panel.
    Note: For specific details on your router’s WPS button operation, refer to your router documentation.
  6. Press OK when Connected to the access point appears.
    Note: If the timeout error screen appears, press OK, then start over from step 4.
  7. Your printer is now connected to your Wi-Fi network.

Install Printer Software For Windows

  1. Start the installer.
  2. Read the connection instructions and then select Next.
  3. The Software Installation List appears. MP Drivers must be selected to use the printer. Select any other software you want to install and click Next.
  4. Select Yes for the license agreement.
  5. Select Next to allow the install wizard to run.
  6. Select your printer in the Detected Printers List and click Next.
  7. Click Complete on the Setup Completion screen.
  8. Continue to follow the on-screen instructions. When the Complete Setup screen appears the printer setup is complete.
  9. Click Next and follow any remaining Informational steps.

Install Printer Software For Mac OS

  1. Insert the CD-ROM that came with your printer, and select the Setup icon to begin the installation
  2. Click Download 
  3. When the Complete Download window appears, click Next.
    Note: To keep a copy of the download file for possible future use to re-install, etc., be sure to check the “Save a file for setting up……” checkbox.
  4. Select Next to install the helper tool.
  5. Enter user information and password. Click Install Helper.
  6. Click Next.
  7. Continue following On-Screen instructions until the Software Installation List appears.
    Note: Only MP Drivers and Canon IJ Network Tool are required. However, we recommended installing ScanGearMy Image Garden and Quick Menu to take full advantage of your printer’s features.
  8. After selecting the software to install, click Next.
  9. Click Yes on the License Agreement.
  10. Setup will continue and may take some time. Continue to follow any on-screen instructions that appear.
  11. When the Add Printer screen appears, click Add Printer.
  12. Select the Your Printer series with Canon IJ Network listed in the Kind column. Click Add.
  13. On the Add Printer screen, click Next.
  14. Continue to follow instructions to finish and exit setup.
  15. Your printer software is installed and set up.

Setting for Scanning with IJ Scan Utility

To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner or printer with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer.

  1. Start IJ Scan Utility.
  2. Select “Canon XXX series Network” (where “XXX” is the model name) for Product Name.
  3. Click Settings… to use another scanner connected to a network.
  4. Click  (General Settings), then click Select in Product Name.
  5. The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.
  6. Select the scanner you want to use and click OK.
  7. In the Settings (General Settings) dialog box, click OK.
  8. The IJ Scan Utility main screen reappears. You can scan via a network connection.

Printing with Easy Setup

This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this printer.

  1. Check that the printer is turned on
  2. Load paper on the printer
  3. Open the printer driver setup window
  4. Select a frequently used profile
    In Commonly Used Settings on the Quick Setup tab, select a printing profile suited for the purpose.
    When you select a printing profile, the Additional FeaturesMedia Type, and Printer Paper Size settings are automatically switched to the values that were present.
  5. Select the print quality
    For Print Quality, select HighStandard, or Draft according to your purpose.
  6. Complete the setup
    Click OK.
    When you execute print, the document is printed with settings that match your purpose.

Leave a Reply

Your email address will not be published. Required fields are marked *